Best Circular Saw Blade for Cutting 2×4

Each circular saw blade is used for different cuttings of different materials; these blades fit in certain saws. The right saw blade is the pain point for the perfect cutting of your working project. The length and diameter of the blades indicate the depth of cut you can perform with your saw.

Best Circular Saw Blade for Cutting 2x4

Your circular saw can perform well only if its blade is compatible. After 48 hours of deep research, we’ve gathered the top five circular saw blades for cutting 2X4 deep remarkably. So if you don’t want to miss the best circular saw blades stick till the end.

What is the Best Blade to Cut 2×4? 

Are you still struggling to get the perfect 2X4 cuts? Most probably, the problem is not with the saw but with the blade. You need a 7-1/4 blade diameter suitable for going with fourteen teeth. This blade can easily cut 2X4 fast and effortlessly. 

A Circular saw is a noisy yet handy saw. Many people ask whether you can cut a 2×4 with a circular saw. Yes! Definitely, you can cut 2X4 cut swiftly with a circular saw. You can cut much faster and precisely as a circular saw is relatively powerful.

What Size Circular Saw do You Need to Cut a 2×4?

The size of the circular saw is a crucial factor if you want to get your desired cutting depth. The standard size of the circular saw to cut 2X4 is 5 ½”; you can mark your project from both sides. You can cut through the wood piece and match the marking points.

A 6 ½” circular saw can cut half of the 2X4 depth in a single pass. 6 ½” is the most suitable size for cutting 2X4. At the same time, a 7 1/4 circular saw can also cut 2X4 at 45 degrees angle.

Top Three Circular Blade in the Market for 2×4 Cut

Low Budget

DEWALT DWA1612CMB 6-1/2-Inch Circular Saw Blade

Dewalt 6-1/2 inch 18 and 24 Tooth Circular Saw Blades

  • The blade has 7.78 x 0.08 x 10.65 dimensions.
  • The weight of the blade is 11.2 ounces.
  • It has a thin kerf design for smooth cuts.
  • Patent-pending tough track tooth design

Best Choice

DEWALT DWA171460 7-1/4-Inch 60-Tooth Circular Saw Blade

Dewalt 7-1/4 inch 60 Tooth Tungsten Carbide Blade

  • The blade weighs 9 ounces.
  • Blade dimensions are 8.94 x 8.58 x 0.35 inches.
  • It comes with 60 teeth for a fine cut.
  • The blade is used for tough coat anti-stick coating.

Overall Great

IRWIN Carbide Corded Circular Saw Blade

IRWIN MARATHON 7 1/4-inch, 24T Carbide Blade

  • The blade has a silicon coating that glides smoothly.
  • Dimensions of the blade are 7 x 7 x 0.13 inches
  • The plate is fully hardened to run truer, longer

List of Top 5 Circular Saw Blades Capable to Cut for 2X4

1.  DEWALT 7-1/4-Inch 60-Tooth Circular Saw Blade:

DEWALT DWA171460 7-1/4-Inch 60-Tooth Circular Saw Blade

A Dewalt 60-tooth circular saw blade is my top recommendation. Why do I prefer this 7-¼” circular saw blade? The specifications of this circular saw blade guarantee its long life and best functionality. The kerf thickness is about .0125″ per tooth.

This circular saw blade comes with 60-tooth, which is incredible. The tooth of the blade helps cut the working project much faster. While the diameter of the saw blade is 7-¼”. Can you cut 2X4 with a 7-¼” blade diameter? Yes, you can effortlessly cut 2X4 with this DEWALT 7-¼” blade diameter. It comes with a tough coat anti-stick coat, which reduces the chances of gumming and friction. The Hook Angle is 18 degrees, while the arbor size is ⅝, and it comes with a diamond knockout.

Circular saws are primarily used to cut big wood pieces. You may wonder what the best blade material to cut wood is. Tungsten Carbide is the best material compatible with wood, and Dewalt has used tungsten carbide in this blade. Although it’s not as good as plywood, the other specialties make it worth buying.

Expert Opinion:

“This saw blade has leveled up my saw game! It does not just cut smoother but helps to cut deeper and faster. You can use this blade for your lovely worm drive circular saw. Plus, it has a long life! Love it!” says Brian.

Key Specifications of DEWALT 7-¼” Circular Saw Blades:

  • This circular saw blade weighs 9 ounces.
  • The dimensions of the blade are 8.94 x 8.58 x 0.35 inches.
  • It comes with 60 pieces, and the number of teeth in the blade is also 60.
  • The blade can be used for both corded and cordless circular saws.

2.  IRWIN Tools MARATHON Carbide Corded Circular Saw Blade 

IRWIN Tools MARATHON Carbide Corded Circular Saw Blade

MARATHON Carbide Corded Circular Saw Blade is an innovative tool of IRWIN. The diameter this blade offers is seven 1/4-inch which is enough to cut 2X4. What’s more, it comes with construction-grade carbide 24 teeth which help in the smooth cutting of the material.

Circular saw users usually ask what material is used in building an IRWIN blade. The material used in this blade manufacturing is Carbide, promising enough to give the blade long life.

You might be concerned about what is the kerf thickness in this IRWIN circular saw blade. So, let me tell you, this blade comes with 3/32 of pretty good kerf thickness. The arbor size of the blade is 5/8″. this multipurpose blade can also be used for laminate cutting or we can choose a special blade for cutting laminate flooring.

The carbide used in the teeth of blades helps to cut faster. Somehow you have to take care of the blade; otherwise, it can be chipped, and the blade does not have a diamond knockout.

Expert Opinion:

“This blade has all the qualities I’ve been looking for for months. It cuts smoothly; it cuts faster. Excellent for all circular saw users. The cherry on top they are very much affordable. I totally recommend this MARATHON blade!” says Daniel

Key Specifications of MARATHON Carbide Corded Circular Saw Blade:

  • The blade has a silicon coating that glides smoothly on the working material.
  • The dimensions of the blade are 7 x 7 x 0.13 inches
  • The number of teeth is ideal for performing different cuts like framing, ripping, and deck jobs.
  • The weight of the blade is 1.6 ounces.

3.  DEWALT DWA1612CMB 6-1/2-Inch 18/24-Tooth Circular Saw Blade:

DEWALT DWA1612CMB 6-1/2-Inch 18/24-Tooth Circular Saw Blade, Combo, Pack of 1 (Packaging may vary)

DEWALT is coming up with its improved tools impressively. Dewalt has used tungsten Carbide material that is wood compatible. The main concern of saw users about this saw blade is whether will this work on a craftsman 19.2 6 1/2″ cordless circular saw. So yes, this will work with a 6 1/2″ Circular Saw. The kerf is thin in this blade, about 1/20 in or 1.4mm.

The number of teeth is 24 in this circular saw blade ensures fine cutting. What feature makes this circular saw blade out of the box? This DEWALT 6-1/2-Inch circular saw blade has a patent-pending rugged track tooth design that helps accurately track the project. The bore is 165mm.

Well, how did the Dewalt circular saw blade have a long life? It is made from high-density tungsten Carbide material, which makes it wear-resistance and tough which helps in the blade’s durability. However, this can cause problems with cordless saws. The blades do not have diamond pop-outs. It is usable for ripping purposes like a table saw ripping blade.

Expert Opinion:

“These blades are killing it! It literally helps cut like butter. Dewalt blades have always been my favorite, but this blade with patent-pending tough track tooth design has immensely helped me. Love it!” says David.

Key Specifications of DEWALT 6-1/2-Inch  Circular Saw Blade:

  • The blade has 7.78 x 0.08 x 10.65 inches dimensions,
  • The weight of the blade is 11.2 ounces.
  • It has a thin kerf design for smooth cuts.
  • The blade has a tough coat anti-stick coating that reduces resistance.

4.  Oshlun SBNF-065060 6-1/2-Inch 60 Tooth TCG Saw Blade

Oshlun SBNF-065060 6-1/2-Inch 60 Tooth TCG Saw Blade

Oshlun 6-1/2-Inch 60 Tooth TCG Saw Blade is the best circular saw blade on the market. What makes the Oshlun TCG blade different? The best thing about this blade is that it comes in two categories 60 ( non-ferrous) and 48 (ferrous) tooth options; you can get the blade according to your requirements.

The material used in this blade is Professional Grade C-1 Carbide compatible with Bronze, Aluminum, Brass, and Copper. This blade is specially made to cut Aluminium but would this be good for cutting sheet aluminum? Yes, but only if it’s aluminum and well-secured to something stable.

The size of the teeth is about 1/16th wide but flared out a bit, so the overall cut is about 3/32 while the kerf is.078″ or 2mm. This blade has Triple Chip Tooth Grind functionality that helps in faster cutting. However, the teeth can melt in the scorching heat. Otherwise, it’s a great circular saw blade that can easily cut 2X4.

Expert Opinion:

“Great experience with this circular saw blade, cuts faster, much deeper, and smoother. 100% recommended from my side,” says Miguel.

Key Specifications of Oshlun 6-1/2-Inch 60 Tooth TCG Saw Blade:

  • The blade has a Negative Hook Angle plus Heat Vents for Cooler Operation.
  • The blade has dimensions of ‎8.8 x 8.3 x 0.1 inches.
  • The cutting diameter of the blade is 6.5 Inches.
  • The blade weighs 6.4 ounces.

5.  Worx WA5085 24T TCT Blade

Worx WA5085 24T TCT Blade

Last but not least, I highly recommend the Worx circular saw. This Aluminium made blade is wood and plastic-compatible or composite material. It would help if you had questions about TCT blades. How long do TCT blades last? Carbide-tipped blades can last from six months to a couple of years. It depends on how you keep them. If you sharpen them regularly, they can have a long life.

Worx came up with the best circular saw blades and saws. Do all four ½-inch blades work with the Worx 4 ½-inch saw? The Worx 4 ½-inch blade works primarily with four ½-inch saws and many other saws.

The blade has come up with 3/8th” Arbor. This TCT blade is pretty affordable. However, the blade can become chipped if you don’t take care well. Overall this is a great blade.

Expert Opinion:

“This blade has a unique and amazing build. The cut is smooth, does the job, and glides on the project. Great experience!” says Jack

Key Specifications of Worx WA5085 24T TCT Blade:

  • The blade is 4 1/2″ Inch.
  • The weight of the blade is ‎3.04 ounces.
  • The blade comes with 3/8th” Arbor.
  • The dimensions of the blade are 4.5 x 4.5 x 4.5 inches.

 

Leave a Comment