Best Table Saw Blade for Plywood and Melamine Board

Best Table Saw Blade for Plywood

When making a piece of plywood furniture, the step of cutting the plywood panel is one of the most delicate. To easily cut your plywood and avoid wastage you need the best table saw blade for plywood. If you are looking for precise information about the blade for plywood you can find them right here.

To offer you a comparison of the best blades, we have created a complete overview for you. Moreover, below you will also find a list of the best selling blades and their features.

Top 5 Reviews of Best Table Saw Blade for Plywood

To make it easy for you and to be able to advise you, we present to you our table saw blade for plywood in summary. Below you will see the review of the above blades in detail. You can, however, reach the blade page directly if you are short of time to read our complete review.

Top 3 Blade Among 5

Budget friendly
Best Budget Friendly Table Saw Blade

Oshlun Fine Finishing Cutting Table Saw Blade

Blade Size

8 Inch

Material

Carbide

Tooth

64 GATB

Kerf.

0.091 Inch

Arbor Hole

5/8

RPM

7500

OVERALL Great
Dewalt Table Saw Blade for Plywood

Dewalt-DW3106P5D60I Miter +Table Saw Blade

Blade Size

10 Inch

Material

Carbide

Tooth

60 ATB

Kerf.

0.094 Inch

Arbor

5/8 inch

Hook Angle

5 Degree


1. Freud Ultimate Plywood and Melamine Blade


Model

LU80R010

Size

10 inch

Teeth

80 Hi-ATB

Material

Carbide

Arbor

5/8 inch

Weight

1.8 pounds

Freud 10 in. Plywood Cutting Blade

The Freud LU80R010 Table saw blade, has four inputs for you to put any type of table saw for cutting wood. This model is ideal for making cuts in panels that have chipboard laminate, as well as MDF, DM, hardwood, plaster, veneer, and foam concrete.

Its teeth are strong enough to carry out the work that is desired because its materials are stable; we are talking about tungsten carbide teeth that give it safe cuts. High-quality carbide, combined with a premium steel blade body, enhances the durability of these blades and ensures their long-term effectiveness.

What Makes It Different?

This is a multifunction blade that you can count on at all times. It is both versatile and robust. With a total of 80 teeth, this blade is suitable for all types of work you can also use this as a flooring cutting blade. It will hold up well for intensive, even professional use.

Moreover, we are much more than familiar with the quality always offered by Freud, leaving its larger loyalists always satisfied. So if you are wondering which table saw blade to favor, and then go to this factory that rarely disappoints.

Expert Opinion

Brien says "It is a perfect blade that is very robust and very well sharpened. Make some trial cuts and it leaves them very fine. What I liked the least is that I ordered a single blade; they charged me for shipping and took the opportunity to send it to me with another order that I had previously made and had free shipping. The box where the two items came, was crushed"

Product Features:

  1. It is made of Premium TiCo HI-Density Carbide
  2. It has teeth of size 4.5 x 2.4mm for deep cuts
  3. The inside diameter is 10 inches and will fit for many table saws
  4. Cuts all kinds of wood, plywood, soft and hard, chipboard and MDF
  5. Thin kerf for fast action and a smooth cut
Pros
  • They are compatible with any saw.
  • It does not burn any material.
  • It has excellent performance for long hours, according to the manufacturer.
  • Leaves no damage
  • Makes delicate cuts and fine finishes
Cons
  • They lose their edge over time

As you read this product's features I hope you feel good to buy the product.

Probable Questions

What other Material can be Cut with Freud LU80R010 Table Saw Blade?

In addition to lighter materials such as plastic or aluminum, this table saw blade also cut through metal without problems.

Is it Possible to Re-Sharpen this Blade?

Yes, the toothed discs of a circular table saw can be re-sharpened. For this purpose, however, it will be necessary to contact a professional in the field.


2. DEWALT Exclusive Miter+Table Saw Blade


Model

DW3106P5D60I

Size

10 inch

Teeth

60 T

Material

Carbide

Arbor

5/8 inch

Pack

2 pieces

Dewalt Table Saw Blade for Plywood

This is DEWALT blade and I am going to explain that why it is the best table saw blade for plywood. It is an excellent choice for people who are looking to buy blades for a workshop with multiple saws. It is also ideal for those who wish to have spare parts stored in case of a problem with their current blades. The price of this makes it one of the best offers among the saw blades.

With 60 teeth containing triple ground tungsten carbide tips that are highly resistant to all of the aforementioned materials, these types of cutting discs can also be used for the collapse of concrete houses.

What Makes It Different?

For your saw, the blade fits the common handheld table saw, table saw, immersion saw, and miter saws. This allows you to use the blades by greatly reducing vibration. Thanks to this, you will have the possibility to make more precise and exact cuts.

Expert Opinion

My Martin says "With this table saw blade the cut left me very satisfied. Given my experience, I recommend it for do-it-yourself work at home."

Product Features:

  • Lightweight; weighing just 3.22 pounds
  • Made with Carbide tips so no worries for being rusty.
  • High-quality carbide increases durability.
  • Made of 60 teeth ensuring durability
  • Can fit on both robust miter saw and table saw
Pros
  • 60 tooth blades are an exceptional choice for cutting wood
  • Make clean, smooth, and fine cuts
  • They work on all types of table saws
  • They quickly cut the wood
  • They can be used in a radial mode without any problem
Cons
  • Overheats over time
  • Teeth may bend

As you read this product's features I hope you feel good to buy the product.

Probable Questions

Can it be Connected to Any Type of Table Saw?

Yes, after checking the correspondence between the inputs and the union of the table saw, which can be a hand held saw, as well as a larger table saw.

What kind of Work can be Done with DEWALT DW3106P5D60I Table Saw Blade?

It can be used to cut other materials such as plastic and many other materials to a certain size.


3. Oshlun Fine Finishing Cutting Saw Blade


Model

SBW-080064

Size

8 inch

Teeth

64 ATB

Material

Carbide

Arbor

5/8 inch

Kerf. Size

0.091 inch

Best Budget Friendly Table Saw Blade

This saw blade is incredibly strong and ideal for virtually any size electric table saw. The professional quality of this blade makes it ideal for all kinds of work, allowing you to cut all kinds of wood surfaces when doing DIY.

The good hold, even after prolonged use, makes it an ideal blade for occasional jobs such as for daily administration operations on woods of different nature. The high-quality Professional Grade Carbide blade guarantees tear-free cutting edges under maximum load.

What Makes It Different?

The special 10º design allows you to use this disc and extend its life efficiently. The blade is of excellent quality and very resistant for a fairly reasonable price. This is one of the best saw blades you can find.

Expert Opinion

Karl Hillard says "I like everything excellent I have used it to cut some doors and not a single chip is noticed.  Although it is made to cut plywood, this blade can cut very smoothly and cleanly all types of wood."

Product Features:

  1. Can resist a maximum speed of 6000 rpm
  2. It allows a cutting angle of 10º in total with ATB teeth.
  3. The 64 teeth make it an excellent replacement for any type of saw.
  4. You can cut Hard, soft, and double-board wood.
  5. Made with Carbide tips for durability
Pros
  • It can be used on thick and thin wood
  • They maintain quality for many years without damage according to the manufacturer
  • Works perfectly on table and heavy duty miter saws
  • Clean and quick cuts can be made
  • It is small but very powerful
Cons
  • Discs may bend with time
  • They burn the plywood a little

As you read this product's features I hope you feel good to buy the product.

Probable Questions

What is the Depth Cut and can it be Adjusted?

With Oshlun SBW-080064 saw blade the depth of cut is adjustable in almost any model of a circular saw. In addition to the saw blade, it is possible to install special grooving cutters, which are an integral assistant in furniture production for creating fastening elements for cabinet parts.

Can this Model Work Professionally?

Yes, you can work professionally with this table saw blade, but do not forget in this case that the manufacturer does not put enough resources in the tool itself for its operation in a professional mode.


4. CMT Industrial Fine Cut 12 Inch Saw Blade


Model

252.072.12

Size

12 inch

Teeth

72 1FTG+2ATB

Material

Carbide

Arbor

5/8 inch

Kerf. Size

0.110 inch

GMT Plywood Cutting Blade

The charm of this saw blade is found at the tips of the blade. The first thing to keep in mind is that it is designed and coated with tungsten carbide, giving it an incredibly strong and durable finish. The second peculiarity of this blade arises with the serrated blades; these allow making cuts with great efficiency and preventing the disc from jamming when used with wood.

For professional or home use, this is an amazing sheet that boasts great durability. The cost is a little high, but the durability is such that you will possibly be using it when another disc could have been changed a couple of times already.

What Makes It Different?

In terms of speed, this blade is ideal because it can withstand the revolutions per minute of virtually any type of electric saw. It is undoubtedly one of the best products, which is why it is one of the most popular options.

Expert Opinion

Mr. Kevin Ward says "Since I work a lot in my hobby workshop with a table saw and this saw blade, it lets plywood fray out quite easily. The blade slid through the board and the cut was clean."

Product Features:

  1. The saw blade has a serrated surface
  2. The sheet tip is made of tungsten carbide
  3. The Plate thickness is 0.087 inch ideal for precision cuts
  4. With Hook Angle of 15°, you can make straight, transverse or longitudinal cuts
  5. The widths of each cut are approximately 3 mm.
Pros
  • It is small but very powerful
  • The teeth become sharper with use
  • It is made for precision work, smooth and clean cut
  • It leaves good finishes according to the buyers
  • The teeth are well carved
  • It has excellent performance for long hours
Cons
  • The blade breaks over time
  • It does not produce a rebound effect

As you read this product's features I hope you feel good to buy the product.

Probable Questions

How Fast can I cut with the CMT Table Saw Blade?

The optimal cutting conditions primarily depend on the physic mechanical properties of the table saw. It should be understood that changing cutting conditions relative to the manufacturer's recommendations leads to a significant loss in tool life.

Can CMT Table Saw Blade be Used to Cut Wood?

Yes, metal band saws can be used to cut wood. Please contact the seller to select the tool that is most suitable for your tasks.


5. Amana Tipped Carbide Saw Blade


Model

610800C

Size

10 inch

Teeth

80 ATB

Material

Carbide

Arbor

5/8 inch

Kerf. Size

0.126 inch

Amana Carbide Tipped Table Saw Blade

The Amana Tool - 610800C saw blade is the epitome of professional table saw products. This table saw blade features an incredibly robust as well as durable design, allowing you to cut virtually any type of surface you may need.

The Amana Tool - 610800C saw blade has a hook angle of 10°, making it to achieve better results in cuts such as impeccable finishes, defined and precise cuts in each material, thus making buyers feel more satisfied when buying it.

What Makes It Different?

The Amana Tool - 610800C saw blade is one of the best options, with manufacturing materials that make them a very durable as well as a strong option. You can enjoy this sheet when making cuts in all kinds of materials. The edge of the blade is designed so that the cut is gradually effective.

Expert Opinion

The blade is very good; you can adjust the fitting on the table saw to cut different depths. I notice a world of difference in the cleanliness of the cut if I compare it with the blade that comes with my standard saw. A breakthrough for a money back investment Says Gonzalez from Texas in the US.

Product Features:

  1. Its blade diameter of 250mm reduces the level of vibration
  2. It is ideal for both table and miter saws
  3. This blade cuts at an angle of 10º.
  4. They are designed with ATB technology for greater efficiency when making cuts.
  5. Cuts all kinds of wood, plywood, soft and hard, chipboard and MDF
Pros
  • They work on all types of table saws
  • They quickly cut the wood
  • They can be used in a radial mode without any problem
  • It has excellent performance for long hours
  • The teeth are well carved
  • It leaves good finishes according to the buyers
Cons
  • The disc may break over time.
  • It does not produce a rebound effect

As you read this product's features I hope you feel good to buy the product.

Probable Questions

How to Achieve a Quality Cut with Amana Tool - 610800C Saw Blade?

To ensure that the edge of the material being cut is smooth and smooth, without chips, it is necessary to use saw blades with a high frequency of teeth. True, this reduces the speed of work.

How to Reduce Amana Tool - 610800C Saw Blade Noise When Cutting?

To eliminate noise, you can try to "play around" with the speed of rotation of the cutting blade.

Other related reviews we discovered for your better knowledge

Conclusion

Each of these saw blades for plywood will be very useful for your table saws since they all fulfill different functions and can be used in different materials. It is also important to note that these saw blades for plywood are of excellent quality.

Leave a Comment